Skip to content
Barone Steel Fabricators
Green roller conveyors running between blue crane columns across the main bay of the Barone shop in Newark

Our facility · Newark

An automated shop, around the corner from Newark Airport.

Robotic cutting and welding, CNC sawing, plate work and rail bending, on a floor we spent six months laying out before the machines went in.

From the air

The whole facility, from the air.

Our Newark shop, covered steel yard and offices sit on one site, around the corner from Newark Airport, serving the New York metro.

Aerial view of the Barone Steel facility in Newark from the front, with the white-roofed shop and offices, the blue-framed covered steel yard beside them and a highway interchange and rail yards behind
The Newark facility from the front: shop, offices and the covered yard.01 / 08

Inside the facility

How the shop is set up.

The site, how a job moves through it, our approvals, and the machines on the floor.

One site in Newark: shop, yard and offices.

Barone Steel fabricates and erects out of one facility in Newark, New Jersey, around the corner from Newark Airport, serving the New York metro.

Before the current machines went in, we spent six months planning the layout of the floor. Steel comes in from the covered yard beside the shop, moves between the lines on roller conveyors under the overhead cranes, and leaves fitted and welded for our own crews to erect.

Structural steel and miscellaneous metals are fabricated under the same roof, so the stairs and rails for a job come out of the shop that made its frame.

  • Six months of layout planning before the machines went in
  • Covered steel yard beside the shop
  • Roller conveyors between the lines, overhead cranes over the bays
  • Structural steel and miscellaneous metals under one roof
The main bay of the Barone shop from above, with steel on roller conveyors and yellow overhead crane runways
The main bay.

In the shop

What the steel passes through.

Every machine here is on our own Newark floor. Steel comes in from the yard and is cut, fitted and welded in house before our own crews erect it.

The blue HGG RoboRail cabinet with its orange infeed and outfeed conveyors on the Barone shop floor

01 / 08

Robotic beam cutting

A robotic plasma cutter for beams and other sections. Copes, holes, slots and bevels are cut by the machine instead of laid out and torched by hand.

Make and model
HGG RoboRail
Department
Structural steel
An operator at the control station beside the green and orange Peddinghaus 1250 DG band saw

02 / 08

CNC band sawing

Cuts beams, columns and other sections to length, run by an operator from the CNC station beside it.

Make and model
Peddinghaus 1250 DG
Department
Structural steel
The AGT Robotics BeamMaster welding arm over its beam positioners and rails in the Barone shop

03 / 08

Robotic beam welding

A robotic cell that welds fittings onto beams, so the welding on main members is done by a programmed arm rather than by hand.

Make and model
AGT Robotics BeamMaster
Department
Structural steel
A plasma torch cutting steel plate on a green plate line, with cut plates stacked on the floor around it

04 / 08

Plate processing

Takes plate in whole and turns out finished parts: base plates, connection plates and gussets, cut to shape and holed by a CNC plasma torch, ready for fit-up.

The Baykal MGH 3116 shear in the foreground, overlooking numbered fabrication bays with welding screens

05 / 08

Hydraulic shearing

Shears plate and sheet to size in one straight cut.

Make and model
Baykal MGH 3116
The Baykal APHS 31440 press brake with its CNC console on a stand in front

06 / 08

CNC press braking

Bends plate and sheet to the angle the drawing calls for, set from the CNC console in front of it.

Make and model
Baykal APHS 31440
The blue Transfluid AutoRail bending machine against a white and blue brick wall

07 / 08

Rail bending

Bends pipe and tube for handrails and guardrails.

Make and model
Transfluid AutoRail by ALT
Department
Miscellaneous metals
An operator at the console of a large blue enclosed machine marked DCM 1000, under a fume extraction duct

08 / 08

Drilling, coping and marking

Drills, copes and marks beams in one machine: spindles for the bolt holes, a robotic plasma torch for copes and bevels, and layout marks scribed on for the fitters.

Make and model
Daito DCM 1000
Department
Structural steel

The floor · Newark

Laid out over six months before the machines went in.

Roller conveyors carry steel between the lines, overhead cranes cover the bays, and a covered yard holds stock beside the shop.

Request an estimate

Bidding a job in the New York metro? Send us the drawings.

Our estimating department prices structural steel, miscellaneous metals, and erection as one package or as separate scopes. Tell us the bid date and we will work to it.

Request an estimate
What to send
  • 1Structural and architectural drawings, with addenda
  • 2Project name, address, and delivery method
  • 3Bid due date
  • 4Scope: structural, miscellaneous metals, erection, or all three

Drawings can be attached to the estimate form or sent by email. team@baronesteel.com